We all want homes that have even temperatures throughout it. However, this isn’t always the case for us, and many homeowners have homes that are cooler or warmer than the rest of the house. This issue can lead to occupants being uncomfortable. For instance, one room could be extremely hot, while another rood could be cold.
Enfield HVAC Repair Company: Top Ways To Prevent Cold & Hot Spots
Throughout the wintertime, many homeowners complain that their upstairs is cold, while the downstairs is warm or vice-versa. These are known as cold spots, and they can be present in any home. The good news is that cold spots are easy to find and they are easy to fix.
Why Do Homes Have Cold & Hot Spots?
Cold spots aren’t horrible, and they may be part of the home’s design. Some rooms have been designed in a way that they attract more sunlight, while other rooms were built to have more shade. However, there might be flaws in the design, such as poor insulation in the walls or around your windows. Ductwork might have been improperly installed, which could be the reason for cold spots. Not only that, but poorly installed ductwork can cause flow issues. Bear in mind that it’s a good idea to take care of those issues as soon as possible. Otherwise, they will turn into more significant and expensive problems.
Eliminating Temperature Issues In Your Home
First, find out where your cold and hot spots are. Next, look for potential issues. Hot and cold spots can be annoying to deal with, especially if you have to spend a considerable amount of time in them. There are several things you can do to determine whether or not you should bring in a professional.
What You Can Do To Remove Uneven Temperatures
Check The Vents & Air Filters- Check your vents because there might be an object blocking it. Something as small and simple could be the issue. When something is in the way of the vent, then airflow could be affected. Also, dust might be the reason for the vents not working correctly. This is similar to changing your air filters. When you do not replace your air filter when it is dirty, the buildup on the filter impacts the airflow and comfort of your home.
Drafts- One of the most common signs that you have a draft is when one part of the home is much colder than other areas of the house. Check around windows and doors to see if there are broken seals. If there are, then invest in a DIY insulation kit. This kit might fix the problem, and they aren’t that difficult to install. After winter has gone, you can easily uninstall the insulation and reuse it the following winter. Another solution is to put something on the floor to keep the draft from coming in under the door.
Inspect The Insulation- Insulation is designed to prevent outside air from getting inside, and it keeps indoor air from going outside. Older homes often have insulation that needs to be replaced. It’s best to hire a professional to inspect your insulation. If they determine your need to have it replaced, the chances are they can do it for you.
What Can An HVAC Professional Do For You?
Clean Your Ducts- If your ducts are dirty, then they may be the reason you have cold and hot spots. If the ducts aren’t free of debris, dirt, and dust, then airflow is obstructed. It’s a good idea to clean your ducts every 2-5 years, but if you have pets or live in a dusty area, then clean your ducts every 1-2 years, or as often as needed.
Install Multi-Zone Heating- A multi-zone heating system can provide different rooms with different temperatures because each room has a thermostat. These types of systems might be more cost-efficient too because you can keep the rooms you used the most heated to your liking, while not heating rooms you don’t use that much during the winter. If you have a home that doesn’t have adequate insulation or if the ductwork isn’t up to par, then consider installing this kind of system.
Properly Maintain Your Furnace- You should have a professional perform a maintenance check before the season starts. If there are issues that can cause cold and hot spots, the HVAC expert should be able to take care of them before the weather kicks in. Also, proper maintenance can help you save money on energy bills and ensure your home is comfortable at all times.
Miller Oil Company provides quality HVAC services throughout Hartford County. We offer a full range of HVAC services, including tune-ups, repairs and HVAC installations.
If you notice there are cold and hot spots throughout your home, then call us today. Our technicians will get to the bottom of the problem and fix it right away. Our services are designed to ensure your HVAC system is working at its best. By hiring us, you will have peace of mind knowing you are receiving the best services at the best price.
If you have any questions or would like to request a free estimate, then give Miller Oil Company a call today. We are standing by to answer any of your questions and to provide you with a free, no-obligation quote.
Some of the areas that we service include Enfield, Melrose, Somers, Somersville, and these zip codes: 06082, 06049, 06071, 06072, as well as all surrounding areas in Hartford County, Connecticut.